 This
space saving calorimeter was primarily conceived for learning
and teaching purposes. Automation
is not always the best solution for these purposes. So we
kept the water and oxygen filling procedures as well as
the calculation of the measurement result in the integrated
“student-mode” manual. This enables the student
to get a much better understanding about the physical and
theoretical background of Calorimetry.
Besides
the key markets of schools, colleges and universities, the
C 200 can be used in commercial and industrial laboratories
with low sample volume and / or low budget as well.
The unit
is extremely easy to handle and operate (self-explanatory)
via a keypad and a clear display. The Software comes with
English, German and Chinese language.  Another
great feature is its size. The “IKA-Cube” with
its dimensions of 400 x 400 x 400 mm (16 x 16 x 16 inches)
fits in almost every niche.
The
unit is highly operator maintenance friendly. The user can
replace parts easily with short instructions by our service
over the phone.
The
external power supply of the unit complies to all global
voltages from 100 - 240 V AC, 50/60 Hz. The Calorimeter
itself is powered with low operating voltage 24 V DC.
Calorific
value measurements can be made in accordance with DIN, ISO,
and ASTM. Details about the Standards can be found in the
Standards Section of this Guidebook.
There
are 4 different measurement modes available. Depending on
the purpose the user can choose the best mode for each individual
application.
| Mode |
Measurement
time |
Comments |
| Isoperibol |
approx.
17 min |
Works
according to standards. Ignition will be done automatically,
result will be displayed |
| Dynamic |
approx.
8 min |
Time
reduced, isoperibol measurement |
| Manual
(isoperibol) aka Student mode |
approx.
17 min |
Ignition
and end of measurement are controlled by the user. Temperature
changes are displayed every minute. All calculations
must be performed manually |
| Time
controlled |
14
minutes |
Every
measurement takes exactly 14 min |
Upgrading
the system? No Problem ! 
Scope
of supply (C 200)
|
C
200 Measuring cell including measuring cup C 200.1 and
ignition adapter |
|
C
248 Oxygen filling station with 2 m (6.5 ft) pressure
hose |
| |
C 5010 Decomposition vessel (Important note: The halogen
resistant decomposition vessel C 5012 can not be used
with the C 200)
|
| |
Set of working equipment to calibrate the equipment
and perform approx. 100 tests) |
|
C
723 Benzoic acid |
|
C
4 Quartz crucible |
|
C
710.4 Cotton threads |
|
Spare
ignition wire |
|
Instruction
manual |
|
