| C 5003.1 Aqua Pro |
 |
Adjusts the conductivity of the water for best performance of the Calorimeter. Prevents growth of algae. Required for C 5000, KV 600 (C 2000). The water needs to be replaced every 3-6 months, depending on the number of samples measured. |
|
7207700 |
|
|
| C 710.4 Cotton thread, cut to length |
 |
500 pieces
cut to length
With known calorific value |
|
1483700 |
|
|
| C 5010.3 Ignition wire, spare |
 |
5 pieces
ignition wire for about 100 combustions each
Used in C 5010 and C 7010 Decomposition vessels |
|
7122800 |
|
|
| C 5012.3 Ignition wire, platinum |
 |
2 pieces
Platinum ignition wire for about 50 combustions each
Used in C 5012, C 7012 and AOD 1.1 Decomposition vessels |
|
2994900 |
|
|
| C 4 Quartz dish |
 |
Ø 20 mm x 20,5 mm high |
|
1695500 |
|
|
| C 5 Set of VA combustion crucibles |
 |
25 pieces
A single crucible is allowed to be used for up to 25 combustions
Ø 20 mm x 19,5 mm high |
|
1749500 |
|
|
| C 6 Quartz crucible, big |
 |
To use this crucible “C 5010.5 Crucible pan, big” is required ( see accessory )
Allows to fill in a higher amount of material with a low calorific value
Especially for samples with a high ash content
Ø 26 mm x 18 mm high |
|
0355100 |
|
|
| C 710.2 VA-Combustion crucible set, big |
 |
Samples with a low calorific-, BTU- value can be measured better, since the bigger crucible allows to fill in more sample material.
IMPORTANT NOTE: Always ensure that the energy brought into the system by burning the sample, is not higher than the maximum allowed! If the energy of the sample is unknown, always start with a low quantity of sample material like i.e. 0.1 g to 0.25 g.
Especially recommended for samples with high ash content.
The wider opening diameter allows to dry samples in an oven faster as well as filling in the sample more convenient.
Stainless steel crucibles. A single crucible is allowed to be used for up to 25 combustions.
NOTE: To use this crucible, the accessory “C 5010.5 Crucible holder, big” is required. |
|
1483500 |
|
|
| C 9 Gelatin capsules |
|
Combustion aid:
Gelatin capsules with already determined calorific value. |
|
0749900 |
|
|
| C 10 Acetobutyrate capsules |
 |
100 pieces
With known calorific value
To fill in samples with volatile compounds
Not hygroscopic |
|
0750000 |
|
|
| C 12 Combustion bags 40 x 35 mm |
 |
100 pieces
Material: PE
With known calorific value
To fill in samples with low calorific value, powdery, and with low specific gravity
Dimension: 40 x 35 mm |
|
2201400 |
|
|
| C 12 A Combustion bags 70 x 35 mm |
 |
100 pieces
Material: PE
With known calorific value
To fill in samples with a low calorific value, powdery and with low specific gravity
Dimension: 70 x 40 mm |
|
2201500 |
|
|
| C 14 Combustible crucible |
 |
100 pieces
Material: Acetobutyrate
This crucible is specially created for samples that are hard to burn, and it burns as an combustion aid with the sample
Wide range of applications; especially in the disposal industry
Required in combination with C 5010.4 Crucible pan for combustible crucible ( see accessories ) |
|
7224500 |
|
|
| C 15 Paraffin strips |
 |
600 pieces
Especially for hard flammable, water containing samples
45 mm x 3 mm |
|
3131100 |
|
|
| C 723 Benzoic acid, blister package |
 |
50 pieces
0,5 g per pellet
Pelleted, blister package
With IKA-certified gross calorific value for Standard-calibrations according to DIN 51900 |
|
3243000 |
|
|
| C 43 Benzoic acid NBS 39i |
 |
30 g
High pure Benzoic acid powder
Standard Reference Material with certificate of the
"National In-stitute of Standards & Technology ( NIST ), USA" |
|
0750600 |
|
|
| C 43 A Benzoic acid |
 |
Low cost benzoic acid powder.
Gross calorific value written on the packaging.
Mostly used as a combustion aid mixed with the sample and pressed into a pellet. |
|
0750700 |
|
|
| AOD 1.11 IKA - Control Standard |
 |
Mineral oil with known Sulfur- and Chlorine content.
Includes detailed work-instructions and a certificate.
Recommended to check the handling, decomposition procedure and the respective peripheral detection devices. |
|
3044000 |
|
|
| AOD 1.12 IKA - Control Standard |
 |
Mineral oil with known Bromine- and Fluorine content.
Includes detailed work-instructions and a certificate.
Recommended to check the handling, decomposition procedure and the respective peripheral detection devices. |
|
3080200 |
|
|
